Marvell Yukon 88e8056 Pci E Gigabit
Hi Si,
Cheers for posting the query on Microsoft Community.
I practice capeesh your efforts and time.
I suggest y'all to try the steps provided in the link below and check if it helps.
Prepare network connectedness issues : http://windows.microsoft.com/en-us/windows-10/prepare-network-connection-issues
Hope this helps in resolving the issue. If the issue persists, do become dorsum to us. We will be happy to assist y'all.
1 person plant this reply helpful
·
Was this reply helpful?
Hi Kalpana,
Thank you for you quick answer. I am not sure that article is of use every bit the network connectivity is working perfectly apart from the WOL role. i will follow step 6 just to be 100% sure only this seems to be a Windows 10/ Commuter result. As the Windows official commuter does non resolve this problem, is there annihilation else you can suggest or do?
Was this reply helpful?
Hullo. My server received the latest big update today so is now up to x.0.10586 Build 10586. WOL is still not working apart from when the PC is in sleep. I have tried all the recommendations in that article and even tried completely removing the Windows driver and installing the official Marvell latest driver but still this is not working. As confirmed normal network connectivity is fine when the PC is powered upward, it is simply WOL that does not work. With Windows vii, even when shut down, the LAN carte stays active waiting for the magic packet. With Windows 10 the carte du jour is powered down when the Bone shuts down simply remains active in sleep fashion.
Please tin can you advise what else I can try or come up with a fix soon.
1 person establish this reply helpful
·
Was this reply helpful?
Well still no word on a fix for this and really disappointed not to take heard anything from Marvell so called client service. Surely others must exist suffering something like?
1 person institute this reply helpful
·
Was this respond helpful?
I do. And I did all (known) possible steps:
1) BIOS
- EuP Gear up = disabled
- Power on by PCI-E = enabled
- Restore on power off = restore concluding state
- Power append fashion = S3 only
- On board Marvell LAN 1 = enabled
two) DEVICE
- Enable wake on Magic Packet
- Allow device to resume PC
- Disabled the possibility to save energy tunring off the device
3) WINDOWS
- Disabled fast startup (changing primal in the registry)
4) Using Append instead of POWER OFF (that in Win10 put S4/D3 states where WOL is not enabled).
I take the lights on the ethernet bill of fare when the PC is suspended (this means that the ethernet card is non totally powered off) and I'thou sure the magic package achieve the device but nevertheless no wake-up of the machine.
Was this reply helpful?
I had the same problem on Windows x.
To resolve it, I went to the Marvell Yukon website and downloaded the driver for my part number and concluding supported operating system. In my instance I take a 88E8053 running on Windows 10 64 bit so picked Windows 7 (x64).
http://world wide web.marvell.com/support/downloads/search.do
I then Updated my NIC driver manually (Browse my computer for commuter software-->Permit me pick...). Pick the Marvell driver.
Once installed this provides an additional property on the device (Windows Key+X-->Device Manager-->Network adaptors-->(Network Adaptor)-->Advanced) called Wake from Shutdown. Change this to On.
Too in the Bios Ability Direction settings, I enabled Ability ON by PCI & PCI-Eastward.
This re-enabled my WakeUp On Lan.
The problem appears to be that Microsoft have non implemented the driver with this property in their version. It would be good for Microsoft to update their driver and make this property available.
62 people institute this reply helpful
·
Was this reply helpful?
Thanks for the detailed reply and apologies for the delay in getting back. I have tried downloading the latest Marvell installer (12.ten.17.iii) which installs the driver 12.ten.14.iii. This does provide the settings you mention:
I have checked all of the other settings y'all mention merely when the server is close down I cannot use WOL. If I put the server in sleep mode then WOL will work. I have tried emailing Marvell but they accept never bothered replying. Is there annihilation else I tin can try?
one person found this respond helpful
·
Was this reply helpful?
Many thank you @AmitP_704!
For my own situation, I had to roll back to a much older version of the driver to become the "Wake from Shutdown" option. Once I did, that worked out perfectly.
I am running Windows Server 2016, but had to go with a Windows 7 x64 driver to get the setting. The more recent Windows 8 driver (which although information technology doesn't say it in the title, is also for Windows Server 2012 R2), did non have the setting and then did not solve the trouble.
Thanks,
Mike
Was this reply helpful?
Many thanks @AmitP_704!
For my own situation, I had to roll back to a much older version of the commuter to get the "Wake from Shutdown" option. Once I did, that worked out perfectly.
I am running Windows Server 2016, but had to go with a Windows 7 x64 driver to get the setting. The more contempo Windows 8 driver (which although it doesn't say information technology in the title, is besides for Windows Server 2012 R2), did not have the setting so did not solve the problem.
Thanks,
Mike
Thanks for this reply, in society for the extra shutdown setting to announced I ended upward using driver version 11.44.1.3 downloaded from hither...
https://support.lenovo.com/gb/en/downloads/ds029166
...and so manually updated to the windows 7x64 version once it had unzipped to my drive.
I run a Shuttle sp35p2 (non-pro) with the 88e8056 Ethernet controller on Windows 10 Domicile.
..And I did all the post-obit steps:
1) BIOS
- ACHI Power setting = S3
- Power on by PCI Card = enabled
2) DEVICE Managing director
Advance Settings
- Enable wake on Magic Package
- Enable wake on pattern match
- Wake-Upwards Capabilities - "Magic Packet & Pattern"
Power Direction
- Allow the computer to turn off the calculator - enabled
- Allow this device to wake the estimator - enabled
- Only allow a magic packet to wake the computer - enabled
iii) WINDOWS Power SETTINGS
- Disabled fast startup
four) WORKS WITH BOTH - SUSPEND and SHUTDOWN
5)Also Works both locally and over the internet
NB - Also annotation Windows Firewall blocked my Magic packet sniffer from checking this was being received so I completely disabled this for testing (still blocked even if I had setup an incoming connection for this) - but in one case setup and re-enabled this does NOT interfere with turning my PC on via WOL.
8 people establish this reply helpful
·
Was this reply helpful?
Marvell Yukon 88e8056 Pci E Gigabit,
Source: https://answers.microsoft.com/en-us/windows/forum/all/marvell-yukon-88e8056-ethernet-wol-not-working/3a4460fd-6477-4088-b212-f71375ecf2b0
Posted by: dunbardirst1972.blogspot.com
0 Response to "Marvell Yukon 88e8056 Pci E Gigabit"
Post a Comment